All Natural Enzyme Spa Treatment


   

     The Natural Solution Spa Water Treatment and The Natural Solution Hot Tub Cleanser

 

Application Directions

A TWO-STEP PROCESS

 

 

 


For best results, We suggest that before putting The Natural Solution Hot Tub Water Treatment in the spa water, That the existing contaminant build-up in the spa system be removed by using our Hot Tub Cleanser product.  ( If tub is older then 5 years its best to use two bottle of the system cleaner).
Works best in water temp 50 to 75 F  run for 2 t0 4 days. After four day drain and refill with fresh water. You May want to check pH. Add the The Natural Solution to your spa and your done.

The Natural Solution Hot Tub Treatment was created to safely and naturally biodegrade organic material, reduce spa maintenance, and produce naturally cleaner hot tub water. The enzyme in The Natural Solution enhance natural processes to safely remove organic containment's which often cause problems with water clarity, algae, and slime growth, while aiding in the digestion of body oils, lotions, cosmetics, and other organics. Safe to use with other hot tub treatment chemicals, our enzyme help stabilize ph, clean filters, and reduce hot tub water upsets. The Solution Natural produces silky soft water with less maintenance's, and on skin irritation! 

Residential Application Rates: Add 2oz per 500 gallons of water capacity weekly. For heavier than normal bather loading, double weekly dose. Initial treatment opening closing, or upset add 4oz per 500 gallons of water capacity. if unable to apply weekly treatments, because of going on vacation for a week or two just add those dose to the water. when returning from vacation just return to your regalur dosing.

Commercial Application Rates: Add 4 oz per 500 gallon of water capacity weekly. For heavier than normal bather loading double weekly dose. Initial treatment, opening, closing, or upset add 8oz per 500gallon of water capacity.

 

Sample Weekly Maintenance:

     1. Apply 2oz of The Natural Solution to your hot tub.

     2. Hose off filters.

     3. Adjust ph if needed.

     4. Shock as needed. (If needed shock with 2 teaspoons of 99% sodium dichior chlorine granules. Open your cover and turn your jets on high. This will aid in gassing the chlorine shock out of the water quickly).

 

For Optimum Results:

     * Use pre-filter when filling or adding water to the hot tub. (Flush pre-filter for 30 seconds before putting in tub).    

     * Clean filters with filter cleanser as needed. (Clean filter are the cornstone to clean, clear water).

     * May be mixed directly with many other hot tub products, but is not to applied at the same time.

     * Apply when temp, is 50-110F, ph is 6-8, & alkalinity is less than 100 ppm.

     * Shock as needed Shocking will not adversely affect The Natural Solution.

 

The Natural Solution is a natural  Enzyme Product,One Bottle Last 4 Months $39.95.
 Never Again Suffer from Burning Eyes, Dried Skin, or Irritating Rashes

Home • Testimonials • What is Bio-Base • Application Directions • Usage Tips • Filter Tips
 Contact Us •  •  • Online Store